How do I clean my sex doll step by step?

Step 1: Gently rotate and screw the nozzle out from the enema bulb ,squeeze the bulb to release the air, then fully immerse the bulb in water and release the bulb, screw the nozzle onto the bulb to complete the installation.

Step 2: Insert the tip with sprinkling holes fully into the tunnels of the doll. Squeeze the bulb to let the water spray into the doll’s tunnels through the sprinkling holes. The sperm and lube inside the doll’s tunnel would be flushed out by the water. You can use a shower-hose attachment if you don’t have a water irrigator but on a LOW and gentle setting. Warm water is good for cleaning sex dolls but any extreme temperature is bad for TPE, so avoid using boiling water.

Step 3: Shaking or squeezing out the majority of the water inside the doll.

Step 4: Gently insert the drying stick with the rounded end(Please don’t pawed away the doll tunnel’s hole overstretch). Roll it around, squeeze it a little to move the moisture around and bring it into contact with the drying stick.

Step 7: Carefully pull the stick back out and set it aside to dry. How long it takes to dry depends on the temperature and ambient humidity. It is Reusable, so one drying stick can be used for a very long time.

Step 8: To dry the doll’s skin, use a Soft Cloth to gently pat down the doll ‘ s skin when wet. Do not apply too much pressure.

Step 9: Once you have removed the bulk of moisture from the dolls, allow it to sit for an hour and full dry naturally. Do not use a hairdryer or any other heating device on your doll. Do not attempt to speed up drying by leaving near a radiator/ fire or any other heating device. (A cool fan will do the trick). After this time you can apply the talcum powder or cornstarch to the dolls’ body(but only on the outside) to give it a nice fragrance and prevent the skin from becoming sticky. Do not apply talcum powder while your dolls is still wet.

Step 10: Gently place the doll into the storage bag and pull the string at the top of the bag so that your doll will be in a sealed and dust-free environment.

About Soap

  • preferably sulfate free
  • Do not use abrasive soaps or any other general cleaning products.
  • You can use anti-bacterial warm soapy water
  • Use a ratio of 1:5 soap to water.

Tips: Due to the different compositions of the oil, it is difficult for us to distinguish what ingredient will cause damage to the doll,So we do not recommend using oily products for care after cleaning the doll.


1.What lube do you recommend?

We recommend you use water-based lubes, these types of lubricants will be much easier to clean and won’t react negatively with TPE.

When having sex with sex dolls, always use water-based lubricants. This will help better vagina and anus without worrying about damaging the doll.

2.How often should I clean my doll?

There are two aspects to this problem, one is the hygiene problem, and the other is the lifespan of the doll.

Normally, we recommend that you clean your doll every 2-4 weeks. This should be the perfect balance between hygiene and ensuring that your doll is used for as long as possible. Many of our customers pay great attention to hygiene (please forgive the pun) and choose to clean their dolls after each use. Keep in mind that doing so may degrade the doll’s skin more quickly and shorten its lifespan or cause the skin to tear faster than you would like.

Because all dolls of SDT are made of high-end TPE materials, so please don’t be afraid. You won’t need often to spend a lot of time cleaning your doll.

So, sometime you won’t need to clean the doll all over the body. We recommend cleaning dolls after every sexual use in the key areas. But our bodies’ natural oils and sweat can damage the doll’s skin over time. To avoid bacterial build up, we suggest a thorough clean the doll all over the body every 2-4 weeks – depending on your usage, you may consider cleaning more frequently.

If you keep your doll in storage for long periods of time, bring it out once a month or so for an inspection and wipe down. You will be able to note and mitigate any moisture issues or other problems.

3.How Do I Dry My Doll After Cleaning?

Ensuring your doll has dried fully is very important as it prevents and friction on the skin which could potentially cause a tear of the skin.

To dry the doll, use a light non-abrasive cloth(microfibre towels) to gently pat down the doll when wet. Do not apply too much pressure as the final part of the drying will be natural.

Once you have removed the bulk of moisture from the doll, allow it to sit for an hour and full dry naturally. After this time you can apply the talcum powder to the doll’s body to give it a nice fragrance and prevent the skin from becoming tacky.

4.Bone Care of Sex Doll

SDT dolls has fixed and movable joints, which can provide her with more flexibility and multiple sex positions.

  • Do not spread the arms and legs of your love doll longer than necessary, as the pressure may cause tearing. When you are not using the doll, always return the doll to her stress-free position, with your arms down and your legs closed.
  • Be careful not to drop her, hit her surface or drag it on the floor, as this will reduce her quality and lifespan.
  • Don’t spread your limbs too much, and don’t use too much force, so as not to damage the bones and skin.
  • Your doll’s wrist is strengthened to support its weight. However, it is recommended to provide support by placing pillows or furniture under the torso when having sex with a dog.
  • Do not leave her in a bent position for a long time to avoid body deformation.
  • Do not stand for long periods of time, as this may damage her position.

5.Sex doll clothing care

It is very important that you check the clothes you are putting on the doll will not transfer any of the colours to the doll. The doll will take on any colour from clothing if they have not been thoroughly washed before using on the doll. TPE skin, in particular, is very porous and will stain.

To clean the clothes, use your usual washing technique but ensure that the clothing is fully dried before putting on the doll.

This applies to anything that comes into contact with the doll if it contains ink or anything that could potentially discolour the skin, avoid contact.

6.How to store my love doll properly?

When you’re not using your doll, you should make sure you store it correctly. Never store your love doll near windows, humidifiers or any other sources of moisture.

Do not store your doll with heaving clothing on. The dyes can leach out into your doll’s skin. Don’t place her in or near other items that could transfer colors and stains either.

Sunlight – When not in use, store your doll in a cool, dry, and dark area. Avoid direct sunlight too as this can age the skin and cause discoloration.

Dust – the skin of your doll will easily collect dust stick to it. We recommend storing the doll in a storage bag or in the original product box as dust can be extremely difficult to remove.

For TPE dolls, the horizontal lying position is better for preservation. Please avoid downward positions, which may cause the doll’s chest to deform.

Please pay attention to the TPE doll to avoid extrusion, because long time’s extrusion will cause deformation, and do not place heavy objects on the physical doll and avoid partial extrusion or tightening, etc. Try to avoid hard surfaces as it can flatten the doll, and avoid any surfaces with colors that can stain your doll.

Also be careful not to put the doll for a long time on the leather or dyed leather seat, also avoid dressing the doll in dark color clothes for a long time, so as not to penetrate the pigment inside the skin.

For packaging items, you can use sex doll storage box, frosted bags, original shipping box or storage bag to store the doll, so you can keep the foam and any protective items for storage!

Never let TPE come into contact with the silicone. Chemical reactions will cause its degradation. If you own both TPE and silicone dolls, you should store them separately.

7.Is replenishing oil necessary?

It is recommended to oil and powder your doll to extend your doll’s lifespan. However, please do this carefully and don’t overdo it.

If you notice your doll is not as supple, you can apply some mineral oil. The general process is to first clean your doll, dry it, after the doll is been fully dry, massage on the oil, and then after the oil has fully been absorbed, powder the doll with talcum powder.

Depending on how much you use your doll, some people recommend powdering at least once a month, and oiling every few months.

Why oil and powder your doll? TPE material naturally leaks oil over time and oiling your doll will help replenish that natural oil. TPE material can also get sticky over time, especially after washing it, so powdering helps smooth the skin and prevents your doll from becoming a dust magnet.

8.How to Prevent Tears in a TPE Sex Dolls Vagina and Anus

Here’s the basics to keep in mind to ensure that you protect your doll for the long-run.

  1. Please be gentle with your woman. Mix things up and use sexual positions that do not spread the legs too far apart. Limit the time you spread your sex doll’s legs apart. Forcing the legs apart too far, frequently, plus adding your weight to the doll will quickly break down the TPE or silicone, causing tears.
  2. Chill on the rough sex. Rough sex wears on your doll’s vagina and anus and can cause premature tears and rips in the TPE and silicone.

Matters needing attention

  • Do not use abrasive soaps or any other harsh cleaning products.
  • Do not use chemicals, alcohol or any other general user stain removers.
  • Avoid using use harsh materials or any sharp objects when cleaning the doll as this could lead to puncturing the skin.
  • Do not use silicone based lubricants.
  • Do not apply too much pressure to the doll’s skin when cleaning or drying the sex doll as again this could lead to a tear.
  • Do not apply perfumes as these contain alcohol which is very harmful to your sex doll.
  • Do not attempt to speed up drying by leaving the doll near a radiator, fire or any other heating device.
  • Do not dress the sex doll in dark clothes or clothes that stain easily.
  • Keep out of reach from children and pets.
  • It is recommended to use original packing bags,sealed boxes, or frosted bags for storing sex doll. Store in a cool, dark place to ensure product longevity. Never store in direct sunlight.
  • If the sex doll accidentally fell to the ground and the skin becomes dusty, wash it with mild liquid soap or antibacterial soap.
  • Don’t Leave The Doll In a Sitting Position For Too Long. People must keep one thing in mind that not to leave their sex doll in a sitting position all day long. Try to leave her in a straight position as much as possible.
  • Always support your doll properly when you carry and move it. Don’t drag or lift at her weakest points such as her legs. Otherwise, she could suffer from a dislocation. During sex, don’t be too rough. Don’t flex body parts against their natural movement. Do not strike your doll too hard, or twist or bend her. If it damages a human, it will likely damage your doll.
  • You have to think that your sex girl is your partner in the journey of pleasure fantasy.Be gentle with her and avoid putting unnecessary items over her. Only then she can remain with you as long as you want.
  • After washing your sex doll properly, never rush towards the drying process immediately. People do not use hair dryers or other direct heating sources to dry sex dolls. And try to use some renewal powder on the skin to help protect the material and keep your doll in prime condition.
  • Only Use Renewal Powder To Beautify Your Doll.People should not apply cream-based makeup like concealers, foundations, cream blushes, etc. on the doll, which will seep into the material and permanently stain the area.No doubt, the renewal powder is the best choice.
  • Don’t Spray Perfume Directly Onto Your Doll. A direct spray of perfume can damage the skin of your beloved sex girl. So, People must not spray perfume directly onto your doll’s skin because the high alcohol content in perfumes can make the pigment rub off and leave your doll with a weird patch of discoloration.
  • Don’t Leave Your Doll Near High Heat. To carry on this relationship with your sex girl, never leave her near high heat for a prolonged period of time because high heat can cause TPE to start melting.

If you have any questions, please feel free to contact us. Our email is [email protected]